**Regular preventative maintenance prolongs your equipment life, ensures your system is running efficiently, and saves on energy costs**
SPRING – Air Conditioning/Heat Pump
- Replace Filter (standard 1’’)
- Check compressor amperage
- Clean indoor coil (if necessary)
- Check all fan motors
- Clean/flush condensate drain & trap
- Inspect/Clean outdoor unit coil
- Check all electrical components
- Check refrigerant levels
- Check Air temperature
- Check operation of system
Refrigerant is EXTRA!
Call for prices or specials
FALL - Oil Boiler/Furnace
- Change Nozzle
- Replace Filter (standard 1’’)
- Clean smoke pipe
- Check safety control lock out time
- Clean or replace pump screen
- Clean burner & nozzle assembly
- Clean out combustion chamber and chimney base
- Clean heat exchanger
- Oil motors
- Check circulator
- Clean/check and adjust electrodes
- Check ignition transformer
- Check coil gasket
- Check and/or drain expansion tank
- Check relief Valve
- Run Efficiency Test
Call for prices or specials
|
FALL – Gas Furnace
- Replace Filter (standard 1’’)
- Check heat exchanger
- Clean/flush condensate drain & trap
- Verify flame burning properly
- Clean and check flame sensor
- Clean Burner Tubes
- Visually inspect gas line
- Verify intake/exhaust working properly
- Check internal fan motor
- Check ignition system
- Visually inspect and check all safety devices
- Run System and check operation
- Check pressure switches
- Check gas pressures
Call for prices or specials
FALL – Heat Pump
- Replace Filter (standard 1’’)
- Check compressor amperage
- Check all fan motors
- Clean/flush condensate drain & trap
- Inspect/clean outdoor unit coil (if necessary)
- Check all electrical components
- Check air temperature
- Check defrost cycle
- Run system in heating cycle
Refrigerant is EXTRA!
Call for prices or specials
|
Note: Air Conditioning preventative maintenance must be performed when the weather is 60° or higher. Refrigerant and any air filter other than the standard 1” are not
included in price. Average service takes approximately 1-2 hours. Extra labor costs may apply for over 2 hours.